Effect of Ge on microstructure and mechanical properties of Ti3SiC2/Al2O3 composites

Owing to the good physicochemical compatibility and complementary mechanical properties of Ti₃SiC₂ and Al₂O₃, Ti₃SiC₂/Al₂O₃ composites are considered as ideal structural materials. However, TiC and TiSi₂ typically coexist during the synthesis of Ti₃SiC₂/Al₂O₃ composites through an in-situ reaction, which adversely affects the mechanical properties of the resulting composites. In this study, Ti₃SiC₂/Al₂O₃ composites were prepared via in-situ hot pressing sintering at 1450 °C. Ge, which was used as a sintering aid, improved the purity and mechanical properties of the Ti₃SiC₂/Al₂O₃ composites. This is because Ge replaced some of the Si atoms to compensate the evaporation loss of Si to form Ti₃(Si_1-xGe_x)C₂, which showed a crystal structure similar to that of Ti₃SiC₂. Furthermore, the molten Ge accelerated the diffusion reaction of the raw materials, increasing the overall density of the Ti₃SiC₂/Al₂O₃ composites. The optimum Ge amount for improving the mechanical properties of the composites was found to be 0.3 mol. The flexural strength, fracture toughness, and microhardness of the composite with the optimum Ge amount were 640.2 MPa, 6.57 MPa m^1/2, and 16.21 GPa, respectively. The formation of Ti₃(Si_1-xGe_x)C₂ was confirmed by carrying out X-ray diffraction, energy dispersive spectroscopy, and transmission electron microscopy analyses. A model crystal structure of Ti₃(Si_1-xGe_x)C₂ doped with 0.3 mol Ge was established by calculating the solid solubility of Ge.     

水厂生产废水处理工艺节地高效化设计探索

随着对环保及自用水率的要求日益严格,水厂生产废水的减排已成为发展趋势.但既有水厂用地紧张和生产废水的处理工艺占地多存在矛盾,制约了水厂新增生产废水处理工艺的可行性.文中引入斜管沉淀提升沉淀效率、取消浓缩池、使用叠螺脱水机代替离心脱水机的优化设计方案,相较原设计的传统分离式生产废水处理工艺,生产废水停留时间减少75％,占地面积减少约48％.实践证明,该优化设计方案能够有效解决水厂生产废水处理工艺设计过程中遇到的用地不足问题,并有效地降低建设投资.     

基于图像分割技术的图像数字水印算法研究

针对数字图像水印技术,通过对闭运算得到的图像再进行开运算,使实验得到的图像区域较为完整,采用4×4的正方形结构元素,使得图像区域有更多的白色像素被置为黑色,对图像进行取反操作,能够对图像区域的非连通区域进行填充.希望能够利用精确的图像分割算法,实现对复杂版面的文档图像的有效切割,在一定程度上对图像数字水印的推广起到促进作用.     

基于改进 abcd 模型的黄河源区径流变化与归因

为改进模型对高寒地区融雪径流模拟不足的缺陷，将融雪模块耦合到传统 abcd 模型。利用 1980—2018 年 逐月实测的径流数据和通过 AnuSpline 方法插值的格网气象要素，驱动改进后的abcd 模型，分析三江源生态保护 措施实施前后（1980—1999 年和 2000—2018 年）黄河源区径流的动态变化，并量化关键气象因素与人类活动对 径流变化的影响程度，即相对贡献。结果表明：耦合融雪模块的 abcd-snow 模型完善了高寒地区水文过程的模拟， 提高对径流的模拟性能，在黄河源区表现出较好的适用性；整个研究时段黄河源区的实测径流呈不显著减少趋势 （?0.80?mm/a，p>0.05），但 2000 年前径流则呈现显著下降趋势（?4.12?mm/a，p<0.05），2000 年后径流则呈显著增加 趋势（3.16?mm/a，p<0.05）；?归因分析表明气候变化是源区径流变化的主导因素。2000 年前，气候变化对径流减少 的相对贡献率为 62.8%，人类活动对径流的贡献为 37.2%；2000 年后，气候变化对径流增加的贡献率达到 120.0?%， 人类活动对径流的贡献为?20.0%。其中：降水的变化是决定径流变化主导因素；其他气候因素的相对贡献较小； 以人类活动为主的生态恢复可显著降低河川径流。本研究有助于理解气候变化和下垫面变化对黄河源区水资源 变化的系统驱动机理，并为流域水资源合理配置提供科学参考依据。     

掘进机截割头钻速优化分析

文章基于EBZ120型悬臂式掘进机进行截割临界转速分析优化,通过利用微元法和弹性力学建立力学模型,确定临界状态下,截割头转速解析解,然后深入分析影响截割转速的因素,依据影响程序确定影响介个转速的因素次序,为截割临界转速的确定提供实际操作提供依据。     

Research and Application of Plunger Airlift Draining Gas Recovery Intelligent Control Technology in Shale Gas Horizontal Wells

Chemistry and Technology of Fuels and Oils - For shale gas wells, plunger lift is challenged by the difficulties like difficult tool tripping in and high operation risks due to the liquid phase...     

基于SVD和SSA-VMD降噪的轴承故障特征提取

针对强噪声背景下轴承故障特征提取困难的问题，提出一种基于奇异值分解和参数优化变分模态分解联合降噪的轴承故障特征提取方法(SSVMD)：首先，对原始信号进行奇异值分解(Singular Value Decomposition，SVD)处理，运用奇异值差分谱法选取有效奇异值并将原始信号重构得到初步降噪信号；其次，为防止故障信息丢失，将残余信号进行麻雀算法(Sparrow Search Algorithm，SSA)优化的变分模态分解(Variational Mode Decomposition，VMD）算法处理，得到最佳的模态个数K和惩罚参数α，选取峭度值最大、包络熵最小的IMF分量与初步降噪信号叠加得到最终降噪信号，并对信号进行包络分析；最后，通过仿真和试验数据分析得出，该方法能在信噪比很低的情况下降低噪声含量并提取轴承故障特征，为设备的状态监测和故障诊断提供理论依据。     

复杂环形内悬空空间网格结构施工卸载优化

为解决麦积山景区游客服务中心项目的卸载施工难题，选取合理的卸载方法，文中借助了有限元软件对拟定的4种卸载方案进行了模拟分析，分别从关键节点的位移变形、结构杆件的最大应力变化、主体结构的支撑体系受力转变、临时支撑的最大反力变化、临时支撑的总反力几个方面优选出了最佳的卸载方案。结果表明内至外卸载方案下，卸载的动态最为平稳，有利于结构和临时支撑的稳定，为最优卸载方案。其相应的分析过程和分析结果都能为类似结构的安全卸载施工提供相关指导和借鉴。     

Enhanced luminescence and energy transfer performance of double perovskite structure Gd2MgTiO6:Bi3+, Mn4+ phosphor for indoor plant growth LED lighting

Deep-red light emitting phosphors are widely used in LEDs for indoor plant growth because of the critical role played by red light in plant growth. The luminescence properties of deep-red phosphors are still not well understood at present. An energy transfer strategy is a common and effective method to improve luminescence properties. In principle, the energy transfer process may occur when the sensitizer's emission spectra overlap with the activator's excitation spectra. In this work, Bi³⁺ and Mn⁴⁺ were incorporated into the matrix of Gd₂MgTiO₆ as sensitisers and activators, respectively. Mn⁴⁺ ions tend to occupy the [TiO₆] octahedral site and the Bi³⁺ ions are expected to substituted in the site of Gd³⁺. The energy transfer process from Bi³⁺ to Mn⁴⁺ was realised and the photoluminescence (PL) intensity of Mn⁴⁺ increased with the doping content of Bi³⁺. Upon excitation at 375 nm, the PL intensity of Mn⁴⁺ increased to 116.4% when the doping concentration of Bi³⁺ reached 0.3%. Finally, the pc-LED devices were prepared by a Gd₂MgTiO₆:Bi³⁺, Mn⁴⁺ phosphor. The high red luminescence indicated that this phosphor has potential applications in indoor LED lighting.